Standards And Approvals - Epson TM-S2000MJ Manual Del Usuario

English
Humidity Operating
Storage
Overall dimensions (H × W × D)
Weight (mass)
dpm: documents per minute, Mbps: megabits per second
*1: The total thickness of the stacked sheets must be 13 mm {0.51"} or less (including uneven sheets due to folds, etc.)
*2: The total thickness of the stacked sheets must be 6.5 mm {0.26"} or less (including uneven sheets due to folds, etc.)
*3: USB (Type A) connector is a factory option.
*4: When using a Full-Speed USB interface,the product performance declines.
*5: The values in the brackets are when the pocket guide is fully pulled out.

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson
power supplies.)
Europe: CE marking
North America: FCC Class A, ICES-003 Class A
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of
this device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could
void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 2004/108/ECEN 55022 Class A
EN 55024
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
One-pocket model
20 to 80% RH
When packed for shipping (ink not charged): 5 to 85% RH
When ink is charged: 25 to 85% RH
177 × 142 × 263.8 (374.8) mm
{6.97" × 5.59" × 10.39" (14.76")}
Approx. 4.5 kg {9.9 lb}
IEC 61000-4-2IEC 61000-4-6
IEC 61000-4-3IEC 61000-4-8
IEC 61000-4-4IEC 61000-4-11
IEC 61000-4-5
*5
WARNING
Two-pocket model
177 × 167 × 298.8 (409.8) mm
{6.97" × 6.58" × 11.76" (16.13")}
Approx. 4.5 kg {9.9 lb}
*5