Control Panel
(Power) LED
Comes on when the product is on.
Flashes while some operations such as turning power on/off, ink charging, or cleaning, are
executed.
Note:
Be sure not to turn off the product or open the covers while
Error LED
Comes on when the product is offline (except during self-test, and cleaning).
Flashes when an error occurs. (See "Troubleshooting" on page 18.)
Document LED
Comes on when the product is ready to process cut sheet paper in the ASF or while the
product is processing cut sheet paper.
Flashes when the product is waiting for cut sheet paper insertion.
ID Card LED
Comes on when ID card is set and the product is ready to process it.
Flashes when the product is waiting for ID card insertion or removal.
Ink LED
Comes on when no ink cartridge is installed or it is time to replace the ink cartridge.
Flashes when ink is low.
Cleaning button
Pressing this button for three seconds or more starts the print head cleaning. (See
"Cleaning the Print Head" on page 17.)
(Power) LED
Error LED
Document LED
ID Card LED
Ink LED
Cleaning button
(Power) LED is fl
TM-S2000MJ User's Manual 11
English
ashing.