Kohler K-8816 Manual Del Usuario página 4

Strainer Cup
Stopper
Screw
Drain Body
Rubber
Gasket
Fiber Gasket
Control Body
Housing
Control Body
Gasket
Control
Body
2. Disassemble the Strainer
Remove the strainer cup and stopper from the drain body.
Thread the screw out of the control body housing and remove the drain body.
3. Prepare the Drain Control
Look inside the control housing and position the actuator assembly with the outer flat toward the
front of the sink.
113776-2-AB
Control Knob
Indicator
Control Flange
Gasket
Plastic
Washer
Flange Nut
Control
Housing
Cable
Control
Flange
Inner
Flat
4
Control
Housing
Outer Flat Toward
Front of Sink
Kohler Co.