To Clean The Suction Grille; To Clean The Air Outlet And Outside Panels; Maintenance After A Long Stop Period; Maintenance Before A Long Stop Period - Daikin FFA25A2VEB Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para FFA25A2VEB:
Tabla de contenido

Publicidad

5 Reattach the air filter and close the suction grille (steps 2 and 1
in reverse order).
6 Turn ON the power.
7 Press the FILTER SIGN RESET button.
Result: The TIME TO CLEAN AIR FILTER notification
disappears from the user interface.
11.1.2

To clean the suction grille

NOTICE
Do NOT use water of 50°C or higher. Possible
consequence: Discoloration and deformation.
1 Open the suction grille.
BYFQ60B
2 Remove the suction grille.
BYFQ60B
45°
BYFQ60C
90°
3 Remove the air filter.
BYFQ60B
FFA25~60A2VEB(9)
Split system air conditioners
4P456960-1B – 2018.08
4 Clean the suction grille. Wash with a soft bristle brush and
BYFQ60C
1
5 Reattach the air filter (step 3 in reverse order).
6 Reattach the suction grille and close it (step 2 and 1 in reverse
11.1.3
1
Clean with a soft cloth. If it is difficult to remove stains, use water or
neutral detergent.
11.2
E.g., at the beginning of the season.
▪ Check and remove everything that might be blocking inlet and
outlet vents of indoor units and outdoor units.
▪ Clean air filters and casings of indoor units (see
the air filter"  on page  16
outside panels" on
▪ Turn on the power at least 6 hours before operating the unit in
order to ensure smoother operation. As soon as the power is
turned on, the user interface display appears.
BYFQ60C
11.3
E.g., at the end of the season.
▪ Let the indoor units run in fan only operation for about half a day in
order to dry the interior of the units. Refer to
cooling, heating, fan only, and automatic operation"  on page  15
for details on fan only operation.
▪ Turn off the power. The user interface display disappears.
11 Maintenance and service
3
3
1
water or neutral detergent. If the suction grille is very dirty, use
a typical kitchen cleaner, leave it on for 10  min, then wash it
with water.
order).

To clean the air outlet and outside panels

WARNING
Do
NOT
let
the
indoor
consequence: Electric shock or fire.
NOTICE
▪ Do NOT use gasoline, benzene, thinner polishing
powder or liquid insecticide. Possible consequence:
Discoloration and deformation.
▪ Do NOT use water or air of 50°C or higher. Possible
consequence: Discoloration and deformation.
▪ Do NOT scrub firmly when washing the blade with
water. Possible consequence: The surface sealing
peels off.
Maintenance after a long stop
period
and
"11.1.3  To clean the air outlet and
page 17).
Maintenance before a long stop
period
3
3
1
unit
get
wet.
Possible
"11.1.1 To clean
"10.2.2  About
Installation and operation manual
17

Publicidad

Tabla de contenido
loading

Tabla de contenido