Yakima FlipSide 4 Manual De Instrucciones página 3

Insert tongue Into
vehIcle's hItch.
IF SPARE TIRE CAUSES
INTeRfeReNce, dO NOT
USE THIS PRODUCT!
Align the holes in
the receiver to the
holes in the base.
Install saFety pIn or lock tongue to the hItch.
• Install safety pin.
extend arms.
• Pull knob.
• Rotate flipside to upright position.
• Pull the lever forward to release
the arms from locked-down position.
1033438J-3/18
Install hItch bolt, lock-washer, and washer.
install bolt,
lock washer,
and washer
from right side
of receiver.
Install pIvot cover.
• Pull knob.
• fold flipSide down.
or
• Attach hitch lock.
TIGHTEN with
adjustable wrench.
Being careful
not to pinch
your hand, snap
the pivot cover
into place
• Insert the key and
lock the lock.
• close the cap.
• confirm engagement
by pulling on lock.
raIse arms completely.
arms will lock into position.
caUtion
keep fingers away from
all moving parts!