Maintaining Your Iron; Cleaning The Soleplate; Using The Self Cleaning Feature - Sunbeam DURA PRESS 4061 Manual Del Usuario

maintenance
Maintaining Your D

Cleaning the Soleplate

Clean the soleplate if starch or other residue
accumulate.
To clean the Soleplate:
Allow the iron to cool and then wipe it
1.
with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers,
scouring pads or vinegar to clean the soleplate.
This will damage the finish.
Run the iron over an all-cotton cloth to remove
2.
any residue.
Using the Self-Cleaning Feature
You should use the self-cleaning feature to maintain
the optimal performance of your iron. The self-
cleaning feature will clean the water reservoir and
steam vents of accumulated minerals, dust and lint.
In general, clean the iron:
• if the steam vents clog up,
or
• once a month if you have hard water,
or
• once every two months if you have soft water.
To use the self-cleaning feature:
Move the Steam Lever from O/Off to
1.
several times to remove debris and minerals
from the steam valve.
P Iron
™
URA RESS
9