Klarstein DELICATESSA 90 HYBRID Manual Del Usuario página 55

Adjusting the bracket position
1. The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
2. Fix the hob on the work surface by screw 4 brackets on the bottom case of hob (see
picture) after installation.
3. Adjust the brackets to the thickness of the work surface.
A
Screw
Glass
Retaining bracket
Screw ST 3.5x8
Bottom
B C
Bracket Screw hole
D
Bottom case
Worktop
EN
55