Kohler K-702010 Guia De Instalacion página 6

#8-18 x 1-1/2" Screw
Bottom Side
Lite Bracket
3. Install the Wall Jamb and Side Lite Glass Panel
Install the Wall Jamb
Locate and align the wall jamb on the bottom side lite bracket. Level the wall jamb and mark a
pencil line location against the wall.
Using a 5/16" drill bit, drill holes using the pre-punched holes located in the jamb as a guide. Insert
anchors into the wall. Secure the wall jamb using four of the #8-18 x 1-1/2" screws provided.
Install the Side Lite Glass Panel
IMPORTANT! Make sure the inside of the bottom side lite bracket is free of debris before inserting the
side lite panel.
Install the side lite panel pin and bushing into the top hole of the side lite glass panel.
Align the side lite panel pin with the track in the wall jamb and carefully slide the panel into the
slot in the bottom side lite bracket.
Press the retaining pin into the hole located on the back of the bottom side lite bracket.
1011451-2-F
Wall Jamb
Anchor
Wall Jamb
Glass
Bushing
Side Lite
Panel Pin
Top View (Side
Lite Panel Pin
Location)
Glass
Door
Bottom Side
Lite Bracket
Insert retaining pin
after installing glass.
6
Wall Jamb
Side Lite Panel
Inside of Shower
Kohler Co.