Uat-600-R Receiver Controls And Display - Amprobe UAT-505 Manual De Usuario

2.2 UAT-600-R Receiver Controls and Display

Receiver Controls
1
2
6 Power On/Off : Press for 2 seconds to turn the Receiver ON/OFF.
7
Volume/Depth :
• Volume – Press momentarily to change between mute, low, med and hi volume levels.
• Depth Measurement – Press and hold (> 2 seconds) until depth measurement indication
appears on the screen.
8 / : Displays sensitivity adjustment on the main screen and for up/down selection in menu screen.
9 Hz : Press momentarily to toggle between available frequency options.
8 kHz*
33 kHz
50 Hz / 60 Hz
Radio
*8 kHz frequency is not used for connection with UAT-500-T Transmitter. This frequency is provided to support
optional UAT-600-T Transmitter.
Enter/Menu – Press momentarily to enter Receiver settings menu.
10
3
4 1 Light Sensor
2
Speaker
3 LC-Display (high-contrast, sunlight-optimized)
Keypad
4
5 Battery Compartment
5
6
8 kHz Active Mode*
33 kHz Active Mode
Power Mode (50 or 60 Hz)
Radio Mode
5
7 8 9 10