13. Top off time
Entering set up
mode.
You will see LqC1
NOTE
• UULE(water level) is not available in dryer.
Press the high Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display previous top off time.
Press Med Temp.(+) or Low Temp.(-) button to select time be-
tween 1 and 30.
Press the Start button.
The machine sets up the top off time, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High Temp. " twice.
Button
PROGRAMMING MODE
display
35