3-1. Special price day setup
Entering set up
mode.
You will see LqC1
NOTE
• noSt (Non-stop wash apply or not) is not available in dryer.
• SUUE (add super wash apply or not) is not available in dryer.
Press the high Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display
.
Press the Start button.
Press Med Temp. or Low Temp. button and then select
or
.
Disable
Enable
Press the Start button.
The machine sets up the special price day, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High Temp. " twice.
Button
PROGRAMMING MODE
display
One or the other will
display.
21