Time Set Up - LG RV1329CN7P El Manual Del Propietario

42
PROGRAMMING MODE

3. Time Set Up

Entering set up
mode.
You will see LqC1
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
The display cycles through 2000 --> 0101 --> Sat --> 0000.
Press the Start button.
Press Med Temp. (+) or Low Temp.(-) button to select year
between 2000 and 2099.
Press the Start button.
The machine sets up the year, then advances to the next
process automatically.
Press Med Temp. (+) or Low Temp.(-) button to select month
between 01 and 12.
Press the Start button.
The machine sets up the month, then advances to the next
process automatically.
Press Med Temp. (+) or Low Temp.(-) button to select day
between 01 and 31.
Press the Start button.
The machine sets up the day, then advances to the next
process automatically.
Press Med Temp. (+) or Low Temp.(-) button to select hour
between 00 and 23.
Press the Start button.
The machine sets up the hour, then advances to the next
process automatically.
Press Med Temp. (+) or Low Temp.(-) button to select minute
between 00 and 59.
Press the Start button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High Temp. " twice.
Button display