2. how to change special price
Entering set up
mode.
You will see LqC1
NOTE
• SPCP(special delicate price) is not available in dryer.
• SPrP(special warm/cold price) is not available in dryer.
• SPHP (special hot price) is not available in dryer.
• SCPA(add super cycle price) is not available in dryer.
• SPCt(add super wash type) is not available in dryer.
• Price setting varies by country.
• Set your country from
• After EEPT, reset your country. (Default country is KOR)
Press the high Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display previous special price.
Press Med Temp.(+) or Low Temp.(-) button to set special price.
(The vend price can be set from 0 to 9900 in 100 increments.)
Press the Start button.
The machine sets up the special price, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High temp. " twice.
mode. (Refer How to enter the
Button
)
PROGRAMMING MODE
display
19