LG RV1329CN7P El Manual Del Propietario página 40

40
PROGRAMMING MODE
1.
Pressing the Start button cycles to the next test function.
Number of times
the Start
button is pressed
None
Check the version and code of ma-
chine.
1 time Electric Coin type : P4:OE
Electric Card type : P4:CE
Electric OPL type : P4:PE
2 time PDA CHECK
3 time Motor runs.
ELECTRIC TYPE: Heater runs.
4 time
Motor + Heater 1
ELECTRIC TYPE: Heater runs.
5 time
Motor + Heater 1 +Heater 2
LED & KEY CHECK
Press High Temp. button.
6 time Press Med Temp. button.
Press Low Temp. button.
Press No Heat button.
7 time Test ends.
Door switch
During check, if the
(Motor & Heater Off, Buzzer beeps
door is open.
seven times)
During check, if the Test goes back at step 3.
door is closed (Motor on & Heater Off )
NOTE
Do not use .
Checking point display
LqC 1
Version and code of machine (All LED on)
Display P4:XX and gU:XX and gd:XX alternately.
XX is product type or the version number.
Ir--
Measured moisture value (70~239)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Version and code of machine
LqC1
dE
(The door is open. Please close the door completely)
Measured moisture value (70~239)