Control Panel; Control Panel Automower - Husqvarna AUTOMOWER 105 Manual De Usuario

Automower 105
®
The cutting height can be varied from MIN (2 cm) to MAX (5 cm). To
adjust the cutting height:
1. Press the STOP button to stop the robotic lawnmower and open the
cover.
2. Turn the height adjustment knob to the required position. The
selected position is indicated by the orange column that can be
seen by the knob through the window.
Automower 310/315
®
The cutting height can be varied from MIN (2 cm) to MAX (6 cm) in nine
stages
1. Press the STOP button to stop the robotic lawnmower and open the
cutting height adjustment hatch.
2. Turn the knob to the required position. Turn clockwise to increase
and counter-clockwise to decrease the cutting height. The arrow
aligns with the selected position marked on the body.
3. Close the hatch.
Automower 420/430X/450X
®
The cutting height can be varied from MIN (2 cm) to MAX (6 cm) in nine
stages.
1. Press the STOP button to stop the robotic lawnmower and open the
hatch.
2. Press the MENU button to access the main menu.
3. Move the cursor using the arrow keys up/down to select Cutting height.
4. Press OK.

3 Control panel

All forms of commands and settings for the robotic lawnmower are made
via the control panel. All functions are accessed via a number of menus.
The control panel consists of a display and a keypad. All information is
shown on the display and all input is done using the buttons.
56 - English
1157864-30,SLIM_HQ 105-450_ESPTITEN_r2.indd 56
ENGLISH
1 2 3 4 5
The display texts are shown in English in the manual, but you will see
the texts on the product display in the choosen language.
IMPORTANT INFORMATION
Always press the START button before closing the cover
to start the robotic lawnmower. If the START button is not
pressed, a message beep is heard and the robotic lawnmow-
er will not start.

3.1 Control panel Automower

When the stop button has been pressed and the hatch is opened, the
start page is displayed showing the following information:
• Date and clock shows the current time.
• The number of operating hours indicates the number of hours
since the day of manufacture that the robotic lawnmower has spent
mowing or searching for the charging station..
• AUTO, MAN or HOME show which mode of operation is selected.
• The battery status shows the remaining battery charge.
• The ECO symbol is displayed if the robotic lawnmower is set in
ECO mode.
• The black clock symbol indicates when the robotic lawnmower is
not allowed to mow due to a timer setting.
• The MENU text illustrates that the main menu can be reached by
pressing the multi-choice button that is located under the text.
The keypad consists of four groups of buttons:
The START button is used to activate the robotic lawnmower. This
•
is normally the last button to be pressed before closing the display
hatch.
• The three multi-choice buttons offer various functions, among
others depending on where in the menu structure you are. The but-
ton function is shown at the very bottom of the display.
• The number keys are used for instance to enter the PIN code or
time settings. The number keys can also be used to enter a num-
ber series for shortcuts to the various menus.
• The operation selection button is symbolised by a house. When
the button has been pressed, the selected operation mode is
shown in the display.
Operation selection
By consecutively pressing the Operation selection button many times,
one can choose between three different operation modes.
• HOME. Sends the robotic lawnmower to the charging station. It
remains here until another operation mode is selected. The text
Home is shown in the operation window. When the battery is fully
charged, the robotic lawnmower will remain parked in the charging
station. The robotic lawnmower will first leave the charging station
and begin mowing again when the operation selection is altered to
AUTO.
105
®
2016-02-19 16:04:27