Bona Belt UX Manual De Funcionamiento Y Mantenimiento página 13

Commencing Operation (Cont.)
Instructions for assembly following transportation (cont.)
3.
Secure the motor by tightening the
knob (A).
5.
Close the belt guard and tighten
the screw.
The drum belt must have a 10.5 mm stretch with a center load of 30±3 N.
Belt tension can be adjusted using the screw.
The vacuum cleaner belt must have a 8 mm stretch with a center load of 18±2 N.
The belt tension can be adjusted using the belt tightener.
4.
Fit and stretch the belts.
6.
Pull the belt tightener (A) as
shown.
Excessive belt tension may cause the premature failure of the ball bearings.
Using the machine when not fully assembled may cause injury or damage to people or objects.
DO NOT use the machine when it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
EN
Bona Belt UX Manual
13