Instructions For Electrical Connection - Bona Belt UX Manual De Funcionamiento Y Mantenimiento

Commencing Operation (Cont.)
Instructions for assembly following transportation (cont.)
7.
Fit the suction pipe (A) and drum control rod (B).
8.
Lift the drum with the lever (A).

Instructions for electrical connection

This machine only operates with the voltage and frequency
shown on the machine data plate. Before connecting the cable
to the power supply ensure the correct voltage and frequency
are available.
14
9.
Connect the power supply cable
to the machine and power supply.
DO NOT expose the machine to rain. This machine is intended
for dry use only. Keep the machine in a dry building and
DO NOT use it in damp or wet places.If the machine is not
connected correctly to the electricity network, death due to
electrocution may occur.
Bona Belt UX Manual