Bona Belt UX Manual De Funcionamiento Y Mantenimiento página 20

Starting the Machine (Cont.)
9.
Connect the plug to the
socket.
11.
To start the machine stand behind the handle, then...
Turn the knob on
the switch from
"0" to "START"
If starting the machine is difficult in winter when temperatures are very low remove the abrasive belt and start the
motor, letting it idle for several minutes. Replace the belt and repeat the start up operations described.
20
10.
Ensure the lever (A) is
lowered and drum is raised
from the floor.
Hold it in this position until
the motor has reached a
sufficient rotation speed
Release the knob, which will
automatically return to work
position "1"
Bona Belt UX Manual