Machine Data Plate; Commencing Operation; Instructions For Assembly Following Transportation - Bona Belt UX Manual De Funcionamiento Y Mantenimiento

Introduction (Cont.)

Machine data plate

The following information can be found on the machine data plate:
1) Machine model
2) Safety symbols
3) Motor power
4) Supply voltage and frequency
5) Country of manufacture
6) Year of manufacture (see 8)

Commencing Operation

Instructions for assembly following transportation

To reassemble the machine after transportation, proceed as follows:
1.
Open the belt guard after turning
the screw counter-clockwise.
12
7) Name of manufacture
8) Serial number. For example TA1915103
• The first two numbers refer to the year of manufacture
(19 =2019)
• The second group of three numbers indicates the day of
the year the machine was manufactured (151 = May 31
• The last two numbers indicate the progressive number of
machines produced that day of manufacture
(03 = 3
th
2.
Position the motor in its
housing.
machine produced that day)
Bona Belt UX Manual
)
h