Compliance With Safety Measures And Warnings; Instructions On Correct Machine Use - Bona Belt UX Manual De Funcionamiento Y Mantenimiento

Prevention Measures for Users (Cont.)

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings
tightly closed. Maintain machine settings in accordance with
the specifications.
Failure to comply with instructions on this machine and
in this manual may cause serious injury and/ or damage.
Read and comply with all safety instructions. Ensure that all
plates, labels, warnings and instructions are secured to the
machine. New plates can be obtained from an authorized
Bona /Kunzle & Tasin dealer.

Instructions on Correct Machine Use

Read this manual carefully and become familiar with the machine.
The equipment is suitable for industrial use (e.g. in hotels, schools, hospitals, offices, factories and shops).
The following information highlights particularly hazardous situations for the operator and/or machine. Understand when these
conditions may be present. Removing safety features could cause death or physical injury. Take all steps necessary to instruct
personnel who may use the machine. Report any damage on the machine or incorrect operation immediately.
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the motor is operating.
4) Always use the machine with the dust bag in the correct position.
5) DO NOT detach the dust bag when the motor is operating.
6) Always disconnect the power supply cable from the machine before performing maintenance.
7) Transport the machine with care due to the heavy weight of the individual parts making up the machine.
8) Always use the machine in well-ventilated areas.
9) Always keep the work area well-lit.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the instruction manual.
12) The use of accessories other than those recommended in this manual may cause injury.
13) The machine is for indoor use only.
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized
personnel.
EN
Bona Belt UX Manual
17