Routine Maintenance; Sawdust Chamber; Drums; Wheels - Bona Belt UX Manual De Funcionamiento Y Mantenimiento

Machine Adjustment Procedures (Cont.)
Wheel adjustment (cont.)
In order to adjust it proceedas follows:
1.
With the tool provided with
the machine, loosen the nut.

Routine Maintenance

To keep the machine in good working condition the following items must be checked and serviced regularly.

Sawdust chamber

Vacuum the sawdust chamber regularly.

Drums

Roulette murale
Check the outer surface of the drum regularly. Remove any dirt.
Roulette murale

Wheels

Remove dirt from the machine unit and wheels regularly.
Dirt may cause uneven sanding.

Dust bag

Roulette murale
Remove the bag and shake it well to remove sawdust.
Turn the bag inside out and wash it in the machine in cold water to prevent blockage of the pores and a decrease in dust
collection ability. We strongly recommended the Bona DCS as an alternative to the fabric bag.

Belt tension

Réglage des roues (suite)
Check belt tension regularly. If the belt is excessively worn it must be replaced.
(For adjustment procedures see page 13 of this manual)
24
2.
Turn the screw (B) .
3.
Check that the operates
parallel to the surface to be
sanded.
Bona Belt UX Manual
4.
Lock the nut.