Hunter X2 Guia De Inicio Rapido página 18

Product Reset
Factory reset WAND
1. Press and hold the WAND button for 5
seconds. "Fdr" (factory default reset)
will appear on the controller LCD.
2. The module LED will turn off.
3. Release the button when the solid
amber LED appears and "done"
displays on the controller LCD.
4. Return to the online setup wizard in your
Hydrawise controller settings account
page to reconnect the WAND to Wi-Fi.
Quick troubleshooting tips
• Be in range of Wi-Fi signal and verify
with your smartphone.
• Verify correct Wi-Fi network name and
password used.
• Verify Wi-Fi network is using 2.4 GHz
and not 5 GHz.
SCAN
for help
https:/ /hunter.help/wifispecs
18
Solid LED color:
WAND is waiting for the user to add
Wi-Fi credentials.
Controller is online and connected to
the Hydrawise server.
Incorrect Wi-Fi password entered or
Wi-Fi network lost.
Flashing LED color:
2 blinks, WAND is in "SAP" (Wi-Fi
Direct) mode.
3 blinks, WAND is in "Pbc" router-
supported (WPS push-button) mode.
Refer to the online setup wizard for Wi-Fi
instructions found in your Hydrawise
controller settings account page.
hydrawise.com