Klarstein 10031575 Manual Del Usuario página 8

1. Remove the packaging and make sure that appliance is intact.
2. Insert the power cord and always make sure the fireplace log insert is placed on a firm and level surface.
3. After use, always ensure that the appliance is switched off and unplugged from the main supply.
Controls
1. The IO switch is used to turn on/off the fireplace flame effects.
2. The fan switch is used to assist heating.
The fireplace has two heating elements with a power of 1000 W each.
3. Switching on heating element 1.
4. Switching on heating element 2.
5. Setting the temperature level: low - medium- high - OFF
Note: If the thermostat dial is in the OFF position, the heating is turned off.
8
1 2 3
heating controls
Operation
4 5
thermostat