Inglesina Quid 2 Istrucciones De Uso página 17

• Do not store the product if it is still wet and do not leave it in humid environments since
mildew may form.
• Store the product in a dry place.
and prolonged exposure to sunlight can cause changes in the colour of many materials.
• Should the product be used on the beach, carefully clean and dry it afterwards in order
to remove sand and salt as this may cause rusting.
solvents, ammonia or benzine.
• Carefully dry metal parts after any contact with water to prevent the formation of rust.
• Keep all moving parts clean and, if necessary, lubricate them with light oil.
HINTS FOR CLEANING THE TEXTILE LINING
do not use solvents, ammonia or bleach. Do not use abrasive cleaners or scrubbing pads.
• Follow the lining washing instructions on the labels.
Do not bleach
Do not tumble dry
• Dry the textile lining completely before using or storing it.
LIST OF COMPONENTS
A Hood
B Bumper bar
C Storage basket
D Rain cover (if available)
"SELF STANDING" SUPPORT
In order to allow the stroller to remain upright on its own, pull out the support (S1)
and place it in its housing.
STROLLER OPENING
To open the stroller, use both levers (P1) and simultaneously, holding the handle
Warning: before use, make sure that the stroller is correctly opened by checking
that the red area is no longer visible from both sides.
Caution: use the levers (P1) exclusively while opening and closing the stroller.
Be careful not to operate them accidentally during the normal use of the stroller.
REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLY
In case of need, the front wheel assembly (D) can be easily removed.
To remove it, pull it out from the front support while holding down the lever (D1).
To reinstall it, simply position it and push it until it clicks into place.
REMOVING/ATTACHING THE REAR WHEELS
Should it be necessary, the rear wheels (E) can easily be removed.
INSTRUCTIONS
Do not iron
Do not dry clean
17 17