Installation; After Use - Casada SMART V Manual De Usuario

Installation

A. Remove the massage chair from the carton and get out the accessoiry.
Massage Chair
lift upwards
Foot massage device
1. The packing and sealing of the massage chair outer carton should be dismantled and the outer
box is lifted out.
2. When the massage chair is lifted out, the back of the backrest will be fixed.
3. Take out the accessories and put them aside.
4. Massage chair removed, as shown above the foot massage device box package is opened, the
foot massage device out.
B. Place the massage chair in an open area.
22
After you have removed the massage chair and foot massager
from the outer packaging, place them at your desired position.
• To avoid the damage of the floor and to reduce the noise,
please put area rug under the massage chair.
• Make sure that there are no barriers at the front and the back
of the massage chair.
• Please do not put it in wet or uneven floor.
• To avoid signal interference, please place it1,5 m away from
AV,TV, and radio.
WARNING
Do not put the power cord under of relax chair!
Installation
C. Double check the installation steps, smooth out any creases in the cushions.
D. Moving the massage chair.
8 cm
CAUTION
• Do not move massage chair when occupied or in use.
• Moving the massage chair may cause damage to the floors. Floor protection is recommended
(e.g. rugs or carpet).
• Do not drop or suddenly let go of the chair when moving as it may damage the chair.
• Two persons are recommended when moving and extra care when handling the massage chair.

After use

1. Press the power button to power off
the massage chair. (A)
2. Turn off the main power switch. (B)
3. Remove plug from power outlet.
• Please do not pull on the power cord to remove the plug.
• Please do not unplug with wet hands.
As illustrated, hold the both side of the panel
by two person, lift the massage chair care-
fully until it is in place.
(A) (B)
23