Noise Data; Technical Data; Vibration Information - Worx WG772E Manual De Instrucciones

1. OPERATING DAIL
2. SAFETY KEY
3. INTELLICUT DIAL
4. BATTERY HOUSING COVER
5. WASHOUT PORT
6. CUTTING HEIGHT ADJUSTMENT LEVER
7. SAFETY FLAP
8. GRASS COLLECTION BAG
9. HANDLE BAR
10. HANDLE QUICK ADJUST LEVER
11. BATTERY POWER INDICATOR
12. MULCHING PLUG
13. BLADE BOLT (See Fig. N1)
14. FAN (See Fig. N1)
15. BLADE (See Fig. N1)
16. SPACER (See Fig. N1)
Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WG772E WG772E.9 (770-789-
designation of machinery, representative of
Cordless Lawn Mower)
Voltage
Cutting diameter
Cutting height
Cutting height
positions
Grass collection
capacity
Battery capacity
Battery type
Battery model
Approx. 75min
Charging time (per battery
Cordless Lawn Mower
WG772E WG772E.9
40V Max*
48cm
20-80mm
7
50L
2.5Ah /
Lithium-ion
WA3545 /
/
pack)
Charger model
Input: AC 100-240V~ 50/60Hz
Charger rating
Machine Weight
*Voltage measured without workload. Initial battery
voltage reaches maximum of 40 volts. Nominal
voltage is 36 volts.

NOISE DATA

A weighted
sound pressure
A weighted
sound power
Wear ear
protection.

VIBRATION INFORMATION

Typical weighted
vibration
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
WA3735
Output: 40V DC, 2.0A
25.2kg 23.2kg
L : 77dB (A) K : 3.0dB(A)
pA pA
L :92dB(A)
wA
a <2.5m/s
2
h
uncertainty K=1.5m/s²
EN
9