Technical Data; Noise Data; Vibration Information - Worx WG717E Traducción De Las Instrucciones Originales

1. SWITCH LEVER
2. CABLE CLIP
3. GRASS BAG FILLING INDICATOR
4. GRASS COLLECTION BAG
5. SAFETY BUTTON
6. UPPER HANDLE
7. LOCK CAM LEVER
8. LOWER HANDLE
9. SAFETY FLAP
10. CARRY HANDLE
11. MOTOR COVER
12. BLADE BOLT (See I1)
13. BLADE (See I1)
Not all the accessories illustrated or
described are included in standard de-
livery.

TECHNICAL DATA

Type WG717E (705-719-designation of
8
machinery, representative of Electric Lawn
mower)
Rated Voltage
Rated Power
Cutting diameter
Cutting height
Cutting height
positions
Grass collection
capacity
Protection Class
Machine Weight

NOISE DATA

A weighted sound
pressure
Cordless Lawn Mower
All manuals and user guides at all-guides.com
220-240V~50/60Hz
1400W
36cm
20-70mm
12.9kg
L : 83dB(A)
pA
A weighted sound
power
Wear ear protection

VIBRATION INFORMATION

Typical weighted
vibration
WARNING: The vibration emission
value during actual use of the power
tool can differ from the declared value
depending on the ways in which the tool is
used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being
cut or drilled.
The tool being in good condition and well
maintained.
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if
any anti vibration accessories are used.
And the tool is being used as intended by its
design and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an
estimation of exposure level in the
6
actual conditions of use should also take
account of all parts of the operating cycle such
as the times when the tool is switched off and
40L
when it is running idle but not actually doing
the job. This may significantly reduce the
/II
exposure level over the total working period.
Helping to minimise your vibration exposure
risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in
K : 3.0dB(A)
pA
L : 95dB(A)
wA
a <2.5m/s
2
h
uncertainty K=1.5m/s²
EN