Leather And Strap Care; Of The Sapphire Crystal; Screw-In Crown; International Warranty - Alpina AL-240 Manual De Instrucciones

Ocultar thumbs Ver también para AL-240:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
WATER-RESISTANCE
The water-resistance rating of your watch
was determined and checked when it
was manufactured at our workshops.
It does not imply a lifetime guarantee
against water entering into the watch.
Your watch is water-resistant only when
the crown is fully pushed-in against the
case. If your watch has a screw-in crown,
it must be tightly screwed into the case.
Your watch is not water-resistant if the
crown is in the winding or time-setting
positions. Likewise, pushers should not
be operated while the watch is wet or in
water.
Ageing and normal day-to-day handling
affect the water-resistance of your watch.
Avoid temperature extremes (immersing
the watch in cold water after a prolonged
period in the hot sun) that can damage
the gaskets as well as any other shocks
– chemical, physical or other – which
might compromise the technical integrity
of the watch case.
We advise you to bring your watch to an
Official Alpina Retailer or Service Centre
for a water-resistance check every 2-3
years.
watch care & warranty
All manuals and user guides at all-guides.com
4.3
LEATHER
STRAP
CARE
We recommend you adhere to the
following indications to keep your leather
strap in good condition for as long as
possible:
Avoid
contact
with
water
1
humidity to prevent discolouration
and deformation.
Avoid prolonged exposure to the sun
2
to prevent discolouration.
Avoid
contact
with
3
substances, cosmetic products and
any other chemical agent.
Leather is an organic and permeable
material and therefore will not last for
ever in its original condition. However, if
you adopt the steps above it will last for
many years. You can replace your leather
strap at any Official Alpina Retailer.
36
4.4
The anti-reflective treatment of the sap-
phire crystal improves the visibility and
contrast of your watch's dial. Normal
daily use and wear and tear may cause
marks to appear on the coating. These
and
are considered normal and are therefore
not covered by the warranty.
4.5
greasy
Some Alpina watches have a screw-in
crown, which must be unscrewed to
change the time or the date. After use,
the crown must be pressed against the
case and screwed in tightly. Failure to do
so will compromise the water-resistance
of your watch.
4.6
ANTI-
REFLECTIVE
TREATMENT
OFTHE
SAPPHIRE
CRYSTAL
Your Alpina watch is guaranteed for a
period of two years (24 months) starting
from the purchase date, covering all
manufacturing defects during regular use
as stated in the following terms: Alpina
Watch International S.A. will replace free
of charge any defective component due
to a manufacturing error, duly noted by
our technical services. Your watch is
under warranty for a period of two years
from the date on the Warranty Certificate,
SCREW-IN
signed and stamped by an authorised
CROWN
Alpina Retailer.
37
INTERNA
TIONAL
WAR-
RANTY
| EN |

Publicidad

Tabla de contenido
loading

Tabla de contenido