Bluetooth­mode - Grundig RCD 1550 BT DAB+ Manual Del Usuario

BLUETOOTH­MODE­___________________________
Bluetooth­Mode­
Connect to mobile device with Bluetooth
1
Press the "ON/OFF" button to switch on the device;
2 Move the (BLUETOOTH/CD/USB/RADIO)
switch to the >>BLUETOOTH<< position.
3 The "Pairing" will be showing on LCD;
4 Go to your mobile device, and find the "Grun-
dig RCD 1550, Grundig GRB 4000" from the
available Bluetooth device list. Then press to
connect to the radio.
When device has been connected to the mobile
5
device, the "Paired" announcement will be displa-
yed.
Playback­control­via­Bluetooth
1
Press the "ON/OFF" button to switch on the device;
2. Move the ( BLUETOOTH/CD/USB/RADIO)
switch to the >>BLUETOOTH<< position.
3 Connect the GRB 4000 BT DAB+, RCD 1550 BT
DAB+ to mobile device via Bluetooth;
e
4 Press the II button to toggle the music playback in
between play or pause status;
5 DOWN­
Press the button to skip back to previous
played songs
6 UP­
Press the button to skip to the next songs;
Pairing­mode
1Press the "ON/OFF" button to switch on the device;
2
Move the BLUETOOTH/CD/USB/RADIO switch to
the >>BLUETOOTH<< position.
3 If the GRB 4000 BT DAB+, RCD 1550 BT DAB+ is
connecting to any mobile device via Bluetooth, press
e
and hold the II button to disconnect the current Blue-
tooth connection.
4 The GRB 4000 BT DAB+, RCD 1550 BT DAB+ de-
vice will be in Bluetooth pairing mode and the display
will show "Pairing".
5
You can repeat the steps in "Connect to mobile de-
vice with Bluetooth" for a new Bluetooth connection.
Power­saving­in­Bluetooth
If there is no Bluetooth connection from the radio to any
mobile devices, the GRB 4000 BT DAB+, RCD 1550 BT
DAB+ will switch to off mode after 15 minutes.
19­
ENGLISH