Grundig RCD 1550 BT DAB+ Manual Del Usuario página 24

CD­(CDDA­/­MP3­DISC)­/­USB­MODE­___________
Playing­back­a­track­memory
1
Start the track memory by pressing
SEL
– Playback begins with the first programmed file or
track.
2
Press »PROG/MEM/STOP­.« button to end playy -
back.
3
To play the track memory again, press
»PROG/MEM/STOP« button once, then press
PLAY/PAUSE/SEL
Changing­the­track­selection
1. In stop mode, keep briefly pressing
MEM/STOP« button until the number of the track
you want to replace appears in the display.
2.
Select the number of the new track by pressing
»DOWN­ « or »UP­
3. Press
»PROG/MEM/STOP« to save the new
track.
Adding­tracks
1
In stop mode, press »PROG/MEM/STOP« button
until the last program number is shown in the display.
2 Select the number of the new track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM/STOP« to save the new track.
Deleting­the­track­memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment or and hold the »PROG/MEM/STOP« butt -
ton while programming.
24­
ENGLISH
PLAY/PAUSE/
»PROG/
«.
«.button