Select a Meter Type
1. Press the <MENU> key and select the Meter Type.
2. Press the Right Arrow> and scroll to [Dual Chan Energy]
3. Press <ENT> to select. Press <Right Arrow> to select meter function. Press <ENT>.
Create a Site
1. Before proceeding make sure that English or Metric units have been selected.
2. At the [Channel Setup] Menu press <Right Arrow> and enter a Site name.
FUE1010 IP40 (NEMA 1) Energy Portable
Compact Operating Instructions, 5/2009, A5E02384186-03
Note
Select [2 Chan Energy] if measuring two different pipes and [2 Path Energy] if sensors
are mounted on the same pipe.
①
Select for measuring two different pipes. (Not available for all models.)
②
Select if two sensors are mounted on the same pipe.
③
Select for summing or subtracting flow from two different pipes.
Commissioning
3.2 Setting the Parameters
19