Alarm Letter Codes And Descriptions - Siemens SITRANS FUE1010 IP40 NEMA 1 Guía Rápida

4.2

Alarm Letter Codes and Descriptions

Alarm Letter Codes
The following alarm codes appear on the main display of the flowmeter.
Table 4-2 Alarm Codes and Descriptions
Letter Codes Alarm Code
SPACE Spacing
EMPTY Empty
HI/LO Rate
FAULT Fault
AER Aeration
MEMRY Memory
MAKUP Makeup
I Interface
Z ZeroMatic
The displays shown below indicate where the Alarm Codes appear on the screen. Press <UP>
or <DOWN> Arrows to change screen views.
①
FUE1010 IP40 (NEMA 1) Energy Portable
Compact Operating Instructions, 5/2009, A5E02384186-03
Description
Transducer spacing may need adjustment
Pipe is empty
Flow above High setting or below Low setting
Three continuous seconds without new data update
Current aeration percentage exceeds the alarm set point
Last valid reading for a selected interval during Fault condition
In-Process Makeup occurred
The following alarm codes appear in the Datalogger status messages:
Liquid Vs exceeds interface alarm set point
ZeroMatic signal occurred
Alarm Codes
4.2 Alarm Letter Codes and Descriptions
Troubleshooting
31