Dash Disassembly - Metra 99-7624 Instrucciones De Instalación

Nissan Cube 2009-2014
1. Remove (2) Phillips screws from
the bottom of the a/c trim panel
then unclip and remove the panel.
(Figure A,B)
2. Remove (2) Phillips screws from
the bottom of the radio trim panel
then unclip and remove the panel.
(Figure C)
3. Remove (4) Phillips screws
securing radio to dash to remove.
Continue to kit assembly

Dash Disassembly

A/C
(Figure A)
(Figure B)
(Figure C)
99-7624
Nissan Frontier (with 4.3" screen)
2013-Up/
Nissan Xterra (with 4.3" screen)
2013-2015
1. Unclip and remove the trim panel
above the radio and climate controls.
(Figure A)
2. Remove the (1) Phillips screw under
panel and the (2) Phillips screws
securing the radio brackets to the
sub dash. (Figure B)
3. Unclip and remove the entire panel
including the climate controls and
factory radio.
4. Remove (4) Torx screws securing the
radio to the trim panel. (Figure C, D)
Continue to kit assembly
(Figure A)
3
(Figure B)
(Figure C)
(Figure D)