Replacing Batteries; Cleaning And Maintenance; Advice On Disposal - UFESA BC1400 Manual De Instrucciones

Selecting weight units
The appliance is equipped with a weight unit selection
function. To change the weight unit, press the unit
change button until the desired unit is displayed.

Replacing batteries

The battery compartment is located at the bottom of
the appliance. Before first use, open the compartment
and insert a new battery.
1
To replace a battery, open the cover of the battery
compartment (6) and remove the old battery.
2
Insert a new CR2032 battery.
3
Close the cover of the battery compartment.

Cleaning and maintenance

Clean with a damp cloth. Do not immerse the base in
water or use chemical/abrasive cleaning products.
Clean all plastic components immediately if soiled with
grease, spices, vinegar or food with an intense taste/
colour. Avoid contact of the appliance with citrus fruit
juices.
When removed from the appliance base, the
measuring cup may be immersed in water and cleaned
with a dishwashing detergent or in a dishwasher.
Never use any aggressive, abrasive or alcohol-based
cleaning products.
Abrasive clothes or sponges may scratch
the surface of your appliance.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused. For
more information on available waste disposal schemes
contact your local refuse service or the shop where the
product was purchased. Manufacturers and importers
are responsible for ecological recycling, processing and
disposal of products, whether directly or via a public
system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the
product any time in order to adjust it to law regulations, norms,
directives, or due to construction, trade, aesthetic or other
reasons, without notifying in advance.