Manitowoc LB Manual De Instalacion, Operacion Y Instalacion página 6

Installation Operation Maintenance
Before Calling For Service Checklist
If a problem arises during operation of your ice storage bin, follow the checklist below before calling service.
Routine adjustments and maintenance procedures are not covered by the warranty.
Problem
Water in bottom of bin
Ice in bin does not drop
Ice falls on floor when bin door is opened Baffle is incorrectly positioned
Ice in bin is congealed and will not break
up
Warranty
For warranty information visit: www.manitowocice.com/
Service/Warranty
• Warranty Coverage Information
• Warranty Registration
• Warranty Verification
Warranty coverage begins the day the ice machine is
installed.
WARRANTY REGISTRATION
Completing the warranty registration process is a quick and
easy way to protect your investment.
Scan the QR code with your smart device or enter the link in
a web browser to complete your warranty registration.
WWW.MANITOWOCICE.COM/SERVICE/
WARRANTY#WARRANTY-REGISTRATION
Registering your product insures warranty coverage and
streamlines the process if any warranty work is required.
6
Possible Cause
Drain incorrectly installed
Ice machine and bin do not have separate
drains
Water-cooled condenser and bin do not have
separate drains
Drain obstructed
Baffle is incorrectly positioned
Ice forming ice bridge
Bin is not emptied on a regular basis
To Correct
Drain must be open site with an air gap and
correct pitch
Correct drain installation
Correct drain installation
Clear drain
Readjust baffle
Breakup ice bridge with paddle.
Verify water is not leaking from ice machine
into bin.
Readjust baffle
Empty bin to remove congealed ice regularly.
Verify water is not leaking from the ice machine
into the bin.
If the issue is not resolved, install a thermostat
to lower level of ice in bin to meet current
usage.
Part Number: 000016538 Rev01 02/21
Section 1