American Standard Cadet 2794.709 Instrucciones De Instalación página 5

9
a. Remove plastic Flush Control Module/Battery Pack
Clip from box, snap and place over "Flush Valve
In-Line Filter" area.
b. Remove Flush Control Module/Battery Pack from box
and follow procedure in "Operational Guide" , steps 4 to 9
under "Changing Batteries / Flush Control Module in
Tank to add batteries to module. (ref illustration from
attached drawing)
Flush Control
Module/Battery
Pack Clip
10
Remove Hand Sensor Module from box and follow procedure
in "Operational Guide" , steps 1 to 3 under "Changing
Batteries / Hand Sensor Module" , while also referencing the
NOTES portion at the end.
Also reference under the "Operational Guide" , "Installation of
Hand Sensor Module" , for preferable locations to mount the
Hand Sensor Module.
Hand Sensor Module
Flush Control
Module/Battery
Pack
- 5 -
Please utilize the included signage should you feel it
necessary to communicate to users how to activate the
hygienic touchless ush. The signage can be affixed to the
top of the tank or around the ush actuator.
Example: on tank cover
Example: around the ushing actuator on wall
7302484-100R1 10/20