Cleaning; Cleaning The Gun Assy; Cleaning The Front Acrylic Cover - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-1

Cleaning

Do not use organic solvents such as thinners or petroleum. They can cause
deterioration of the material surfaces.
To clean the machine, wipe with a dry soft cloth. If the unit is extremely dirty, use a soft cloth
dampened with a neutral detergent to remove the dirt, and then rub lightly with a cloth
dampened slightly with water. Finally, wipe thoroughly dry with a soft cloth.
7-1-1

Cleaning the Gun Assy

Clean the tip of the barrel everyday to maintain gun accuracy. Use a clean soft cloth to
wipe the tip of the barrel.
• Do not use detergents or chemicals for cleaning.
•
Be careful not to damage the tip of the barrel.
7-1-2

Cleaning the Front Acrylic Cover

Clean the following sensor section's filters (20 locations) on the Monitor Mask everyday to
maintain gun accuracy. Clean the filter on the LED board with a soft cloth to prevent
scratching the surface. Scratches on the monitor mask can affect the Gun Assy detection
performance.
Filter (20 locations)
Monitor mask
70
Tip of gun barrel