Replacing The Trigger Microswitch - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-19 Replacing the Trigger Microswitch

1. Open the Gun Body.
2. Disconnect the two Faston terminals and replace the Microswitch.
Microswitch
Connect the blue wire to
the N.O. terminal.
Faston terminals
3. Reassemble in reverse order.
• After replacing the Microswitch, go to Test Mode to check operation.
(see 6-2-3-3 page 61)
•
Be sure to initialize the Guns.
(see 6-2-3-2 page 58)
94
(See 7-16 page 91)
Connect the black wire to the COM terminal.