Gun Assy) - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-10-2

(Gun Assy)

•
The SIDELED PC Board can be damaged by static electricity.
Before handling the SIDELED PC Board, always touch an earthed metal surface
to discharge any static electricity.
•
The red colour seal is affixed to the SIDELED (R) PC Board's connector. The blue
colour seal is affixed to the SIDELED (B) PC Board's connector.
1. Remove the Control Panel.
2. Disconnect one connector and remove 2off cap screws (M4x6). Then remove the
Tower LED Bracket.
3. Remove 3off pozi head screws (M3x6), with flat and spring washers, and remove the
SIDELED PC Board.
SIDELED (R) PC board
(For the player 2 Gun Tower,
SIDELED (B) PC board.)
pozi head screws (M3 x 6)
(with both flat and spring washers)
4. Reassemble in reverse order.
84
(see 7-9 page 82)
Cap screw (M4 x 6)
Connector
Tower LED bracket
Tower LED bracket