Machine Information; Technical Specifications - VONROC RT501AC Traducción Del Manual Original

that these instructions are provided to any person
who uses the machine.
- Improper maintenance of the router can lead
to uncontrollable situations. Use only sharp,
well-maintained router bits and adjust these
according to the instructions provided by the
manufacturer. Router bits may only be used
for the purpose for which they were intended.
Always use the appropriate router bit for your
application and ensure that it is in good condition
as this reduces the risk of accidents.
- Accidental contact with the router table's moving
parts can lead to dangerous situations and/or ac-
cidents. Switch the machine off and disconnect
it from the mains when it is not in use, before
you perform any maintenance and before you
change or adjust the router bit. This precaution-
ary measure prevents the tool from being started
accidentally.
- Incorrect use of fences and other workpiece feed
devices can lead to dangerous situations. Consult
the instructions in the appropriate part of this
user manual.
- Incorrect positioning, fitting or fastening of the
router bit can lead to dangerous situations. Be
sure that the router bit rotates in the correct
direction and that the workpiece is fed into the
spindle against the direction of rotation of the bit.
- Be sure to select the correct router bit speed for
your application. Consult the manual supplied
with your electric router for this purpose.
- Keep your hands away from the workpiece by
using a fence, push stick or other feed device to
feed the workpiece towards the router bit. Use
the feather boards supplied to hold the workpie-
ce instead. This reduces the risk of injury.
- Ensure that the router table is located on a sta-
ble, level surface.
- Keep your workplace tidy and remove chips and
dust regularly. Clean your power tool's ventilation
slots regularly.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
WWW.VONROC.COM
minimum thickness of 1.5 mm
tension cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use
The router table is exclusively designed for private
use and for hobby and DIY projects for routing in
wood in conjunction with an electric router. Any
other applications are expressly prohibited and are
deemed improper use.

TECHNICAL SPECIFICATIONS

Model no.
Voltage
Frequency
Current
Table dimensions without extensions
Table dimensions with extensions
Table height
Max. router bit diameter Dmax:
Max. installed router weight
Max. installed router power
Max. workpiece dimensions:
Width
Length
Height
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2 - 7.
1. Fence
2. Table Extension
3. Mitre Guide
4. Feather Board
5. Switch Box Outlet
6. On/Off Switch
7. Guard
8. Dust Port
9. Leg
10. Table
EN
. If you use a ex-
2
RT501AC
230–240 V ~
50 Hz
8A max.
460x335 mm
870x335 mm
280 mm
Ø22 mm
3.5 kg
1800 W
100 mm
2000 mm
55 mm
7.0 kg
11