Intended Use - SMA SUNNY TRIPOWER 5000TL Instrucciones Breves

1 Intended Use
1 Intended Use
The Sunny Tripower is a transformerless PV inverter with two MPP trackers which converts the direct
current of the PV array to grid-compliant three-phase current and feeds it into the utility grid.
The product is suitable for indoor and outdoor use.
The product must only be operated with PV arrays of protection class II in accordance with
IEC 61730, application class A. The PV modules must be compatible with this product.
PV modules with a high capacity to ground must only be used if their coupling capacity does not
exceed 1.25 μF (for information on how to calculate the coupling capacity, see the Technical
Information "Leading Leakage Currents" at www.SMA-Solar.com).
All components must remain within their permitted operating ranges at all times.
The product must only be used in countries for which it is approved or released by SMA Solar
Technology AG and the grid operator.
The product is also approved for the Australian market and can be used in Australia. If DRM
support is required, the inverter may only be used in conjunction with a Demand Response Enabling
Device (DRED). By doing so, you ensure that the inverter will implement the active power reduction
commands from the grid operator in every case. The inverter and the Demand Response Enabling
Device (DRED) must be connected to the same network, the Modbus interface of the inverter must
be activated and the TCP server set.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
2 Symbols
2 STP5-12TL-20-IS-xx-13
Notice
This symbol indicates general dangers. In this case, it indicates that the in-
verter must be additionally grounded if local conditions require additional
grounding or equipotential bonding.
Danger to life due to electric shock
The product operates at high voltages. All work on the product must be
carried out by electrically qualified persons only.
SMA Solar Technology AG
Quick Reference Guide