Menu; Export Data And Display Using Excel; Special Accessory - Bosch BAT 131 Manual Original

en 6 | BAT 131 | User information
3.6

Menu

1. Press  to access the Menu.
2. Use the  or  to highlight the line you want to edit.
3. Press to edit the line or save your changes.
E
4. Use  or  to select the function to use or edit.
5. Press to move to the next location.
E
6. Press  to return to the Menu.
Option Description
Perform Test
Begin the Battery and System Test pro-
cedure.
Unused Battery Mo- Perform a quick test on batteries in in-
de ventory.
ON Perform Unused Battery Test, Clear or
add to memory,
OFF Turn off "Unused Battery Mode"
View Test Results View Unused Battery Mode test results.
S/N Input Enable or disable serial number if a bad
cell is detected.
Voltmeter
Start the test battery voltage.
View / Print Display the previous test result. Press

the
Export / Clear Data Export the test results (max. 100) to a
USB stick
BAT 131.
Counter R Deletion of results.
R Shows a summary of the results of
the measurements taken.
Settings Customize tool options to fit your needs.
Language Select a language for the tester.
Default: English
Set Address Create a header for your printed test re-
sults with your business location infor-
mation.
Set Time Select 24-hour or AM/PM and set the
time.
Default: AM/PM
Set Date Select the date format and date.
Default: MM/DD/YYYY
Contrast Adjust the contrast setting of the tes-
ter display.
Default: 10
Temperature Units Select the temperature units Degrees °F
or Degrees °C.
Default: Degrees F
Amp Clamp Prompt for Amp Clamp availability.
Version Info Lists the software version, software ver-
sion date, and serial number.
Update Update the tester's internal operating
software.
After export to an USB stick you can open the text-file with
1)
extension ""bty" preferable with Excel (se chap. 3.7).
|
1 689 989 132 2013-09-09
button to print the results.
), or delete the memory from
1)
3.7

Export data and display using Excel

i
After being stored on a USB stick, the data can be
viewed on a PC/laptop.
Procedure:
1. Switch on the BAT 131.
2. Select "EXPORT / CLEAR DATA." and press E.
3. Select "EXPORT DATA" and press E.
4. Insert the USB stick into the USB port of BAT 131
and press E.
 The stored data are transferred.
5. Start Excel on a PC/laptop.
6. Insert the USB stick in the USB port of the PC/Lap-
top.
7. Select "Open file".
8. Select USB stick and open the "Mustername.bty"
file.
9. Select the "Separate" option.
10. <Continue>.
11. Select the separator "Comma".
12. <Continue>.
13. Conclude data import with <Complete>.
"
The stored data are displayed.
3.8

Special accessory

Designation Item number
Current probe 1 681 354 034
Robert Bosch GmbH