Setting By Means Of Grundfos Go - Grundfos CMBE Instrucciones De Instalación Y Operación

8.5.2 Start/stop of pump
Stop the pump by pressing . When the pump is stopped, the
"Stop" text next to the button will illuminate. The pump can also be
stopped by continuously pressing
are on.
Start the pump by pressing
until the desired setpoint is indicated.
If the pump has been stopped by pressing
given free to operation by pressing
If the pump has been stopped by pressing
restarted by pressing .
The pump can also be stopped with the R100, Grundfos GO
Remote, or via a digital input set to "External stop".
8.5.3 Resetting of alarms and warnings
A fault indication can be reset in one of the following ways:
1. Via the digital input if it has been set to "Alarm resetting".
2. Briefly press or on the pump. This will not change
the setting of the pump. A fault indication cannot be reset by
pressing or if the buttons have been locked.
3. Switch off the power supply until the indicator lights are off.
4. Switch the external start/stop input off and then on again.
5. With the R100/Grundfos GO Remote.

8.6 Setting by means of Grundfos GO

8.6.1 Grundfos GO Remote
The product is designed for wireless radio or infrared
communication with Grundfos GO Remote.
Grundfos GO Remote enables you to set functions and gives you
access to status overviews, technical product information, and
current operating parameters.
Use Grundfos GO Remote together with this mobile interface:
• Grundfos MI 301.
until none of the light fields
or by continuously pressing
, it can only be
again.
, it can only be
1
+
Pos. Description
Grundfos MI 301:
Separate module enabling radio or infrared communication.
1
Use the module together with an Android or iOS-based
smart device via a Bluetooth connection.
8.6.2 Communication
When Grundfos GO Remote initiates communication with the
product, the indicator light in the center of Grundfos Eye flashes
green.
On products fitted with an advanced operating panel, the display
indicates that a wireless device is trying to connect to the product.
Press OK on the operating panel to connect the product with
1
Grundfos GO Remote, or press the Home button to reject
connection.
Symbol
Setpoint
5.00 bar
Operaring mode
Normal
You can choose between these communication types:
• radio communication
• infrared communication.
8.6.3 Radio communication
Radio communication can take place at distances up to 98 ft (30
m). The first time Grundfos GO Remote communicates with the
product, you enable communication by pressing the Radio
communication button or OK on the operating panel.
Later when communication takes place, the product is recognized
by Grundfos GO Remote, and you can select the product from
the List menu.
8.6.4 Infrared communication
Infrared communication can take place at distances up to
minimum 6.5 ft (2 m).
When communicating via infrared light, Grundfos GO Remote must
be pointed at the operating panel of the product.
2 3
Status Settings Assist
Description
Press OK on the operating
Control mode
panel to connect the product
Const. pressure
with Grundfos GO Remote.
Press the Home button to reject
connection.
Actual controlled value
4.90 bar
9 8 7 6 5
15