Warnings And Safety Notes - Beurer HT 50 Instrucciones Para El Uso

Moldeador de aire caliente
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30

4. Warnings and safety notes

Danger
To avoid damage to health, we strongly advise against using the device in the
following situations:
• Never submerge the device in water or other liquids! Risk of electric shock!
• If the device should fall into water despite following all safety precautions, immediately pull the
mains plug from the socket! Do not reach into the water! Risk of electric shock!
• Have the device checked by an authorised specialist workshop before using it again! Danger to life
due to electric shock!
• Keep metal objects (such as jewellery) away from the air intake [8] to prevent them from being
sucked in – risk of electric shock!
• Do not insert any objects into the casing! Risk of electric shock!
• If the device has been dropped or has suffered any other damage, it must no longer be used. Risk
of electric shock and injury!
• If there is visible damage to the device, mains cable/plug or accessory. If you have any doubts, do
not use the device and contact your retailer or the specified Customer Services address. Risk of
electric shock!
• Do not use extension cables in the bathroom to ensure the mains plug can be accessed quickly in
an emergency.
• Keep packaging material away from children – risk of suffocation!
Warning
To avoid damage to health, please note the following:
• Ensure that no highly flammable liquids are located near the device. Risk of fire!
• The air outlet and the air intake filter [8] of the hot air styler must remain free of fluff, dust and hair
that has been sucked in. Risk of fire!
• The hot air styler, the air outlet [4] and the air intake filter [8] must not be covered. Risk of fire!
• Do not use the device on synthetic hair – risk of fire!
Note
• Remove all packaging material before using the device.
• Connect the device only to a socket featuring the voltage stated on the type plate.
• If you do not know the local mains voltage, request it from the relevant organisation.
• Only pull the mains cable from the socket by the mains plug.
• Do not use any additional parts that are not recommended by the manufacturer or offered as
accessories.
• Under no circumstances should you open or repair the device yourself, as faultless functionality
can no longer be guaranteed thereafter. Failure to comply will result in voiding of the warranty.
• In the event of a fault or damage, have the device repaired by a certified specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass on the device to someone else, make sure to also pass on these instructions for use.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido