Before Assembly; Care And Maintenance - Carlson Pet Products 0938 PW Manual De Instrucciones

Before Assembly

A
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A 12" Extension (1)
Gate Frame (1)
B
4" Extension (1)
C
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that your gate
and extensions are properly installed. Improper installation could
result in the gate becoming unstable or dislodged from the
doorway. Always make sure the extension is securely attached to
the gate before using. The safety of your pet and/or child is your
responsibility. Please keep these instructions for your reference.
IMPORTANT
• Never use more than two extensions per side of gate.
• If hardware mounting to a surface other than drywall or wood,
please consult with a professional about installation.
• Base locks are to be used at all times, on both sides of the gate.
B
D Wall Cups (4)
1" Wall Mount Screws (4)
E
Threaded Spindle Rods (4)
F
C
0938 PW
0945 PW
REMOVING YOUR GATE FROM THE WALL
To remove your gate from the wall, rotate the adjustment wheels on
each of the (4) threaded spindle rods to depressurize the gate from its
doorway or opening. Then, gently pull or push the gate free from its
doorway or opening.

CARE AND MAINTENANCE

Periodically check the gate for signs of damage, wear, or missing
components. Do not use if any part is missing, worn or damaged.
Check the gate regularly to ensure all the hardware and mountings
are tightened. Do not use abrasive cleaners or bleach. Clean by
sponging with warm water and a mild detergent.
English
D
E
F
NOTE
MAX SIZE
29 38.5 in, 41 tall
29 50 in, 41 tall