Infiniton 75CRGASG56 Manual De Instrucciones página 4

after waiting at least I minute.
To turn off a burner
Electric Hot Plates
The hot plates vary in diameter and power: "normal" and "fast". The latter can be identified by a red boss in
the center of the hot plate itself.
The hot plate can be regulated by turning the corresponding knob in the clockwise or counter-clockwise
direction to any one of the 6 different settings:
0
OFF
1
Low
2-5
Medium
6
High
The section entitled, "Practical Cooking Advise", provides information on the recommended settings for
various types of food or cooking processes.
When the knob is on any of the settings other than "OFF", the "H" operating light comes on.
Broiler
(only on certain models)
The broiler can be regulated by turning the corresponding knob in the clockwise or counter-clockwise
direction to any of the 12 possible settings:
0
OFF
1
Low
2-11
Medium
12
High
When the knob is on any of the settings other than "OFF",the "H" operating light comes on.
Before cleaning or performing maintenance on your appliance, disconnect it from the electrical power supply.
To extend the life of the cooktop, it is absolutely indispensable that it be cleaned
carefully and thoroughly on a frequent basis, keeping in mind the following:
The enameled parts and the glass top, if present, must be washed with warm water without using abrasive
●
powders or corrosive substances which could ruin them;
The removable parts of the burners should be washed frequently with warm water and soap, making sure
●
to remove caked-on substances;
On cooktops with automatic ignition, the end of the electronic ignition device must be cleaned carefully
●
and frequently, making sure that the gas holes are not clogged;
The electric hobs should be cleaned using a damp cloth
●
and then rubbed with oil while still warm;
Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive
●
detergents (containing phosphorous) for an extended period of time, it is recommended that these parts
be rinsed thoroughly with water and then dried well, It is also a good idea to clean up any spills;
Before using the ceramic glass module, the surface must be cleaned, using a damp cloth to remove dust
●
or food residues. The ceramic glass surface should be cleaned regularly with a soultion of warm water and
a non-abrasive detergent, Periodically, special products will need to be used to clean the surface. First,
remove all food buildup or grease with a cleaning scraper, e.g.
CERA
(not supplied) (Fig. 1).
Clean the cooking surface when it is still warm with a suitable cleaning product and paper towels. Then
rub with a damp cloth and dry. Aluminum foil, plastic items, objects made of synthetic material, sugar or
, turn the knob in the clockwise direction until it stops (it should be on the "." setting).
(only on certain models)
How to Keep Your Cooktop in Shape
Cooktop