Infiniton AP-260 Manual De Usuario página 30

When set in AUTO mode, the appliance will switch to NIGHT or DAY Mode
automatically, (DAY Mode by default) according to the light level in the room. When the
light in the room is beginning to fade for more than 3 minutes, the appliance will switch
to Night Mode. Likewise, when the light has become brighter for more than 5 minutes,
the appliance will switch back to the Day Mode.
In DAY Mode, the operating status will be as follows:
.The Plasma function will be ON by default. Press the 'PLASMA' button to set the
Plasma filter on or off.
.The Air Quality indicator will be on by default. Press the 'AIR QUALITY' button to
switch the air quality indicator on or off.
.According to the air quality detected, the fan speed will be adjusted
automatically. When the air quality is poor, the fan will run at high speed; if fair
quality mid speed and if good, will run at low speed.
In NIGHT Mode, the operating status will be as follows:
.The Plasma function will be ON by default. Press the 'PLASMA' button to set the
plasma generator on or off.
.The air quality indicator will be OFF by default. Press 'AIR QUALITY' button to
press this button to make the air quality indicator on or off.
.The appliance will switch to silent mode automatically.
AIR QUALITY INDICATION
In order to display the air quality in a precise way, the air quality is divided into 32 grades
and each is displayed by corresponding colours. With changing air quality, the air quality
indicator will change colour accordingly.
ADJUSTING THE AIR QUALITY SENSOR SENSITIVITY
The appliance allows you to adjust the sensitivity of the air quality sensor for the
AIR QUALITY INDICATION
Colour
Blue
Green
Red
Air Quality
Very Good
Fair
Poor