Filter Replacement - Infiniton AP-260 Manual De Usuario

FILTER REPLACEMENT

This appliance is equipped with a feature to ensure that the filters are in good
condition when the appliance is operating. When one of the filters is almost full and
has to be cleaned or replaced, the 慉 ir Quality?light starts to flash. If you do not
replace the Multi-function, HEPA and Activated Carbon filters, the appliance stops
operating and is locked off.
FIRST ALERT TO CHANGE THE FILTERS
The filter function will be relatively poor near the end of its working life. The air
quality light will flash to remind the user to change the filters.
SECOND ALERT TO CHANGE THE FILTERS
If you do not replace the filters in time after the first alert, approximately 3 weeks
later the Air Quality light will flash and the buzzer sound every 30 minutes to remind
you to replace the filters.
FILTER REPLACEMENT LOCK
If you do not replace the filters in time during the first and second alerts, the
appliance will be locked off. After operating for approx 3 weeks, the appliance will
stop working and the Power light and Air Quality light will flash with a continuous
beep.
. How long it takes before the appliance is locked out depends on the room air
quality after the filter replacement alert.
. When the appliance is locked out, you will hear a beep when you press any
button. You can shut down the appliance by pressing and holding the on/off
button.
If the appliance is locked out:
1.Switch off the appliance and unplug it.
2.Replace the appropriate filters as follows: