Tabla de contenido
Publicidad
Wired Controller XK46
function for different kinds of wired controller, the setting method is one of those
two methods.
Setting method one:
Start up Save function for Cooling: When the unit is off, simultaneously press
"TIMER" and " " buttons for 5s, the buzzer will give out a sound and then unit will
enter into Save setting mode. "
on. Press "MODE" button to switch to Cooling or Dry mode. Press " " or " "
button to adjust the temperature limit for Save function; press "ENTER/CANCEL"
button to start up Save function.
Fig.4.13 or 4.14 Shows how to set Save function for Cooling:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
" icon is blinking. "MIN" icon and Mode icon are
46
Publicidad
Tabla de contenido
