Child Lock Function; Gate-Control Function - Gree XK46 Manual Del Usuario

Wired Controller XK46
When the remote monitor or central controller activates Remote Shield on the
wired controller, "
controller, "

3.16 CHILD LOCK FUNCTION

When unit is turned on normally or turned off, pressing "
together for 5 seconds will turn on Child Lock function. "
Pressing " " and "
All the other buttons will be disabled when Child Lock function is on.

3.17 GATE-CONTROL FUNCTION

When there is Gate-control System, user can insert a card to turn on the unit or pull
off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted),
" " icon will show, neither remote control nor operation of wired controller will be
effective and icon "
Note: This model cannot be connected with gate control system on its own
because it cannot detect gate control signal directly. To realize gate control display and
gate control function, it has to be used with wired controller that includes gate control
signal detecting function (used as master and salve wired controller).
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
" icon will show. If user wants to control through the wired
" icon will blink to remind that these controls are disabled.
" together again for 5 seconds to turn off this function.
" will be flickering.
" will show on the display.
34
" and " " button